|
LEAK SEALING MADE EASY!
The range of Vetter Leak Sealing Bags has been field-proven in practise throughout the world with respect to leaks on tanks, barrels, pipes, tank and container trucks. The consistent further development of these successful versions has improved them even more therefore achieving increased ease in application.
For example, there is the Vetter Loop Leak Sealing Bag, an innovative version compared to the present versions with slits or swivel eyes to fix the fastening belts.
In order to seal leaks quicker, it can remain in the transport protection bag. The low air requirement enables a foot pump, contained in the set, to be used and has a safety valve and manometer. This means that it is completely independent of any other air supplies.
| |
|
|
- No danger of spark generation due to tension belts being fed through guide slits
- The ratchet belts press the bag onto the leak
- Flat design
| |
|
|
- It is possible to tension the belt at all angles due to the large movement area of the swivel eyes
- The bag is tensioned onto the leak
- Can be used in narrow confined spaces
| |
|
|
- For thick walled containers up to an inside pressure of 9 bar (130 psi/90 m water head)
- Tear-proof belt, tensile strength of 5,000 kg (11,035 lbs)
- Flat design- height is only 2 cm (0.8 inch)
- Low weight
NOTE:
Not to be used on plastic containers, only on metal containers which permit a load from 10 kg/cm² (22 lbs/0.155 in²)
| |
|
|
- Easy sealing of leaks even on large leakages due to a sealing area of 86 x 57 cm (34 x 23 in.). This therefore increases application possibilities
- Tear-proof belt
| |
|
|
- Simultaneously fulfills 2 functions: Seals the leak and enables controlled draining of the liquid through the drainage chamber
- Inflatable sealing area around the drainage chamber
- Can be inflated with a hand pump or foot pump owing to the low air requirement (2.81/0.1 cu. ft.)
- Coupling on the bag made of stainless steel
- Blocking valve contained in the set is also made of stainless steel
| |
|