|
Set 30 Part # 3500005000
Set 40 Part # 3500005100
Set 60 Part # 3500007200
|
|
Contour matching can be carried out using two different methods:
- contour matching using contact chambers of the aircraft lifting bag
- contour matching using vacuum chambers
CONTOUR MATCHING USING THE CONTACT CHAMBERS
The transverse and longitudinally arranged bag chambers enable optimum matching to the positioning surfaces, especially if the aircraft is positioned at an angle.
The foam rubber padded plate (10 mm/0.4 in) is used as a protection against sharp-edged parts. A padded plate (30 mm/1.2 in) can be additionally ordered.
CONTOUR MATCHING USING VACUUM CHAMBERS
The increasing number of new aircraft fuselage and wing shapes make contour matching imperative in the field of aircraft recovery using pneumatic lifting bags. It was for this reason that Vetter GmbH further developed a field-proven recovery system in cooperation with the authorities at Frankfurt Airport which offers the following advantages:
- low pressure point loading on sensitive aircraft parts
- meets the specifications of the aircraft manufacturers
- high degree of stability
- high safety standard
- individual contour matching
| |
|